Dynamics Flex Film 200 Breatheable
Dynamics Flex Film 200 Breatheable
Product Description: Flex Film 200 is a heat-stabilized co-extruded film modified from a modified PA resin it is an embossed film used for debulking stages during composite parts manufacturing. Embossed pattern allows air breathing in order to get a good vacuum level for compaction of prepreg plies at room or low temperature. Using Flex Film 200 avoids the use of a breather ply and when used with a low temperature sealant tape represents an economical and time saving option for debulking cycles. For a good air breathing the film must be used with the right side up. Ask our technical team for support for a correct use. TECHNICAL PROPERTIES MAX Working Temperature: 205°C – 401°F APPLICATION SYSTEM Polyester Vinyl Ester and Epoxy Resins TENSILE STRENGTH ASTM D882 MD 60MPa TENSILE STRENGTH ASTM D882 TD 60MPa ELONGATION AT BREAK (ASTM D882) MD 270% ELONGATION AT BREAK (ASTM D882) TD 280% STANDARD THICKNESS 0050mm – 0075mm 0.0020in – 0.003in PLANAR DENSITY 0063 / 0087 KgM2 ORDER UNITY Square Meters M2 STANDARD WIDTHS 1520mm – 3040mm – 4060mm / 60in 120in 160in AVAILABLE FORMATS: Sheet Tube V-Sheet NOTES Suitable for autoclave cure process. All PA-based films absorb water. The water or moisture absorption will soften the film and a high content of moisture is the perfect condition for flexibility performance.Flex Film is packed in roll and in polyethylene bags and must be stored in a clean and humid environment with 50%-70% RH and 10°C-25°C temperature.